A photo of Metal Magic, a pool product used to remove metal stains and metal in swimming pool water

Metal Magic

Effectively removes problems on pool surfaces from staining caused by metals; easily removes suspended metal particles from pool water.

Product Details


  • Crystalizes metals and removes stains caused by metals in pool water
  • Can help to remove and prevents scale buildup
  • Removes metals such as iron, copper, silver and manganese
  • Compatible with all filtration types
  • Compatible with all sanitizers
  • Safe for use with any type of pool equipment


  • Prevents staining and scaling
  • Protects plumbing and equipment
  • Can be used to solve existing water issues or prevent bad water from causing issues


  • Best results occur when water temperature is above 60 degrees F
  • Adjust pH to 7.5 (or higher) and clean filter as necessary; add at a period of time when pool is not used
  • Reduce chlorine to 1 ppm prior to application and for 1 week after application
  • Turn off chlorine generator. Disconnect, bypass, or remove Nature 2, Frog, and similar system
  • For light staining or low metal content in water, use 1 quart per 10,000 gallons of pool water
  • For other treatment options refer to the ProTeam Metal Magic Sponge Test .pdf (below)
  • After application, keep filter running continuously for 48 hours. Pool use can resume in 8 hours. Avoid superchlorinating for 1 week after treatment
  • Pool water with high calcium levels, TDS, or a positive saturation index may cloud with use, which will clear with normal filtration. ProTeam Dry Clarifier or EXO Clarifier will speed the recovery

Available Sizes

1 qt bottle
1 gal. jug
5 gal container

Product Downloads

Related Products

Photo of ProTeam Liquid UV Shield, a pool product that protects your pool from UV rays

Liquid UV Shield

Picture of Winter Mix, a pool chemical used to prepare swimming pools for the winter

Winter Mix

Photo of Spa Calcium Up, a spa product used to increase the amount of calcium in your spa

Spa Calcium Up